More Views

Starter Robot Kit-Gold (IR Version)

Description:

This Kit is a great choice for learning robotics, electronics and Arduino programming. It contains mechanical parts and electronic modules for you to start exploring the robot world, it can be used to build  a robot tank or a three-wheel robot car.
With the following electronic modules :  Me Orion, ultrasonic sensor, IR remote controller and IR receiver, an IR controlled robot or an ultrasonic obstacle-avoiding robot can be build. The Me series electronic modules are easy-to-use, very friendly to beginners.

Features:

  • Perfect for beginners learning robotics, electronics and Arduino programming.
  • Build a Robot Tank or a Three-Wheeled Robot Car.
  • Aluminum extrusion structure.
  • Easy wiring, no soldering required.

Documents:

 Note:The battery of IR Remote Controller will be taken to assure safe transport, you may need to buy it by yoursalf. The battery size is CR2025.

Part List :

 1 × Beam 0824-96  2 × Threaded Shaft 4x39mm  4 × Plastic Rivet R4060
 1 × Beam 0824-128  2 × Shaft Collar 4mm  4 × Plastic Rivet R4120
 2 × Beam 0824-144  4 × Flange Bearing 4x8x3mm  4 × Plastic Ring 4x7x2mm
 1 × Plate 3x6  1 × HEX Screwdriver 2.5mm  1 × Me Orion(Base on Arduino UNO)
 1 × Bracket 3x3  1 × Cross Screwdriver 3mm  1 × Me Ultrasonic Sensor 3.0
 1 × Bracket P3  2 × HEX Allen Key 1.5mm  1 × Me Infrared Receiver Decode 
 2 × DC Motor-25 Bracket B  1 × Wrench 7mm&5mm  1 × New Me IR Remote Controller
 1 × Caster Wheel  22 × Socket Cap Screw M4x8-Button Head  1 × 6P6C RJ25 cable-20cm
 2 × DC Motor-25 6V/185RPM  14 × Socket Cap Screw M4x14-Button Head  1 × 6P6C RJ25 cable-35cm
 2× Shaft Connector-4mm  4 × Countersunk Screw M3x8   1 × USB 2.0 A-Male to Micro B-Male Cable
 4 × Timing Pulley 90T  4 × Headless Set Screw M3x5   2 × Base Bracket  B
 2 × Tyre 68.5x22mm  3 × Nut M4  1 × Battery Holder for (6)AA
 38 × Track  1 × Nut M8  
 38 × Track Axle  6 × Nylon Stud M4*30  
$154.92

Availability: Out of stock

Out of Stock

Product Tags

Use spaces to separate tags. Use single quotes (') for phrases.