Laser Engraver Upgrade Pack(500mW) for XY-Plotter Robot Kit V2.0

Description:

Laser Engraver Upgrade Pack is for XY Plotter Robot Kit V2.0, it can engrave by laser. 

Usage: 

For the places required engraving or cutter such as familes, hackerspaces, schools, companies, etc. 
Minimum age:18 ages. Under the age of 18, please use under the care of their parents.

features:

  • Frame: Anodized aluminum.
  • Engrave materials: Wood boards, colorful paper cards, dark opaque acrylic, foam papers, dark cloth, leather, etc.
  • Cutting materials: Colorful paper cards, foam papers, etc.
  • Working area (X×Y): 300mm×350mm.
  • Engrave accuracy: 0.1mm.
  • Max Engrave Speed: 50mm/s.
  • Power: 100-240 V~50/60Hz AC/DC Power adapter, 12V/2.0A.
  • Software: Benbox Laser Engraver.
  • Supports file type: JPG,PNG,BMP,GIF,DXF(benbox);SVG,BMP(mDraw).
  • Connections: USB.
  • Electronics: Makeblock Me Orion (Based on Arduino Uno).

Note: The higher output power of the laser, the better processing capacity it is. 

The 500mW laser engraver can do better engraving and cutting ability, it takes less time and more efficient than the 250mW laser engraving.
Follow the instruction, assembly the lasers elements to the assembled XY Plotter Robot Kit V2.0 and upload the firmware to the Me Baseboard. You can use Benbox Laser Engraver to control the laser engraver robot to engrave fabulous artworks. 
For reference video as below: (https://www.youtube.com/watch?v=Y2Hj5XXX_hc).
Wavelength γ= 405nm Blue-Violet Laser 450~500mW semiconductor diode lasers elements.

Suggested material:
  • suggested engrave material: wood board, colorful paper cards, dark opaque acrylic, etc.
  • suggested cutter material: colorful paper cards, foam papers, etc.

 qq-20150330165820.jpg

qq-20150330165901.jpg

 

Security:

Pay attention when you’re operating the blue-violet laser MAKE SURE you’re wearing the goggles to avoid the dangers.

 laser-engraver-upgrade-pack-for-xy-plotter-robot-kit-v2.0-warning-card.jpg

 

Additional accessories:

  • A pair of blue-violet laser goggles. Goggles picture above is for reference only, please in kind prevail.
  • Several colorful paper cards.

documents:

Instruction of Laser Engraver Upgrade Pack

 

Parts List:

450-500mW Laser Components

1

 

Cross &2.5mm HEX Screwdriver

1

Bracket 3x6

1

Screw M4x8

4

DC power cord 5.5*2.1MM

1

Countersunk Screw M3x8

4

Motor Cable Jeck plug

1

Nylon Cable Ties

5

blue-violet laser goggles

1

Foot pads

4

colorful paper card

4

   
$140.84

Availability: In stock

In Stock

Product Tags

Use spaces to separate tags. Use single quotes (') for phrases.