More Views

Arduino MEGA ADK- (Italy)


The Arduino MEGA ADK is a microcontroller board based on the ATmega2560.It has a USB host interface to connect with Android based phones, based on the MAX3421e IC. It is compatible with Android's Accessory Development Kit examples, It has 54 digital input/output pins (of which 15 can be used as PWM outputs), 16 analog inputs, 4 UARTs (hardware serial ports), a 16 MHz crystal oscillator, a USB connection, a power jack, an ICSP header, and a reset button, and Similar to the Mega 2560 and Uno,it features an ATmega8U2 programmed as a USB-to-serial converter.


The Arduino MEGA ADK has a resettable polyfuse that protects your computer's USB ports from shorts and overcurrent. Although most computers provide their own internal protection, the fuse provides an extra layer of protection. If more than 500 mA is applied to the USB port, the fuse will automatically break the connection until the short or overload is removed.

Microcontroller ATmega2560
Operating Voltage 5V
Input Voltage (recommended)    7-12V
Input Voltage (limits) 6-20V
Digital I/O Pins 54 (of which 15 provide PWM output)
Analog Input Pins 16
DC Current per I/O Pin 40 mA
DC Current for 3.3V Pin 50 mA
Flash Memory 256 KB of which 8 KB used by bootloader
Clock Speed 16 MHz
USB Host Chip MAX3421E
Length 101.52 mm
Width 53.3 mm
Weight 36 g


Drivers & Setup:

With this board you need to change the boards.txt file in your Arduino directory (find it in: "Arduino-00xx > hardware > arduino"):


Arduino 0022 or older         boards.txt
Arduino 1.0 Beta boards1.0.txt


Windows users in order to get working the board need a .inf file for this specific product:




Availability: In stock

In Stock

Product Tags

Use spaces to separate tags. Use single quotes (') for phrases.